kimberley kruiser logo
logo

ENERGY



There are 2 technologies that use electrical energy and 2 ways of providing energy

Using Energy:

  1. The LED lighting is a bright white light in a flexible short strip that directs light for reading on either side of the head of the bed, and above the ladder for safety at night in using the ladder and seeing what may be below.
  2. The Dielectric Membrane heater is a special thermal heater that operates with only a timer and uses 12W of power (1 Amp at 12V approx). It will elevate the temperature BELOW the mattress to approx 40 degrees c and this heat will slowly radiate through the mattress accross the floor. It is not a complete heater at this modest power but it will keep the mattress dry and will pre-heat the bed for warmth.

Providing Energy:

  1. The Solar Panel provides 0.1A of power at 13V and will trickle charge the 7Ah battery. It will also keep the battery at an elevated voltage to minimise sulphation. It has a visible flashing LED to indicate it is charging
  2. A 3m extension cable with a male and female cigarette adaptor either end will connect the battery to the vehicle cigarette lighter outlet. This will charge the battery whilst driving or provide additional power source for the heater for constant heating all night. Note that on some vehicles, the cigarette adpator is isolated when the ignition power is off.

 

Kruiser Kamper Mycube KruiserKaravan King of the off road Kimberley group
Live chat by BoldChat