mycube® is a
lightweight roof top tent with small footprint designed for virtually
any size vehicle.
It is also designed for
virtually any Roof Rack system.
It uses innovative composite honeycomb material and weighs less than 40
kgs as the basic roof top tent. Adding options will increase the weight to around 50kgs for most and to 60kgs as the Star System.
When fitted to a
vehicle’s roof rack, mycube® has
a footprint of 1135mm wide and one of the following:
No Deflector Shield: 1500mm long
Short Deflector Shield: 1670mm long
Large deflector Shield: 2070mm long
With an overall height of less than 35cm, it has an aerodynamic shape
reducing the drag associated with bulky roof rack items.


The internal comfort sets
a new standard in roof top tents. The bed is 138cm wide and 190cm long
with extra space in the length. There is storage area for boots and
other personal items separately to the bed area.
The unit has all weather
access with virtually no chance of water getting in, even in a howling
storm. The side windows have a patented external weather cover as well
as the internal zip-up window cover.
The ladder is telescopic
and integrates into the frame with adjustable legs.
What separates this roof top
tent from ALL Others is the technology available for added comfort:
- The high technology
Aluminium honeycomb floor insulates the mattress and has a mill finish.
This is far superior to the chinese plywood floor on other models.
- The canvas is
Australian made Generation 2 with a patented silver impregnated finish
to reflect the heat. This is far superior to the non-breathable
nylon in chinese imports.
- The optional dual
layer mattress with highest density foam base and the soft
“pillow” foam on the top layer. This mattress is
treated with antimicrobial protection for allergy free sleeping.
- The di-electric membrane heater that will pre-heat the mattress to
eliminate condensation and provide a cosy nights sleep. For continued
heating in the cool desert, the optional energy pack and 7Ah battery
will keep the heater running for hours.
- The Tropical roof
which adds another roof layer for added comfort. This is more than a
"fly" that others offer. It is breathable canvas and
typically reduces internal temperatures by 20%. It is in the patented
silver finish for heat reflection as well.
- The Carbonfree
Lighting™ system with 4 switched LED lights, an onboard AGM
battery and solar panel. The
light over the ladder gives peace of mind for late night use. The
overhead and reading lights give the pleasure of reading for hours at a
time.

MYCUBE with
short Deflector Shield Which is the Standard Configuration
mycube®
UltraLight is priced with options shown on the
pricing page.
mycube® Star
Awning System weighs around 6kg and clips in and opens out in minutes from the
rear of the vehicle.
This will allow for canvas mesh walls to zip and
velcro on and give a 270 degree angle of protection
mycube® is
designed to be 100% recyclable, necessary for export to Europe.
mycube® is available from
Kimberley Kamper Dealers and TJM Dealers throughout Australia
mycube® Quick Facts:
|
Roof Racks: |
No special racks needed but racks must be
capable of load. |
|
Weight: |
From 36kgs for the bare bones, Typical around 50kgs and Star System around 60kgs |
|
Bed Base Size
when opened up: |
Accommodates a Double Bed 140cm wide,
210cm long |
|
Length on vehicle roof: |
1670mm (includes short front nose cone Pod)
Approx 700mm to 900mm between roof racks. |
|
Width on vehicle roof: |
1135mm wide |
|
Vehicle Suitability: |
Can load on any vehicle that will take a
roof rack loaded weight of 55kgs and a static load with people weight
when camping. Only 2 roof racks are required. |
|
Co-exist with Kayak/Bikes? |
Yes, if vehicle can manage weight of
kayak/bike in addition to mycube. There is enough space available. |
|
Side loading: |
Independent of rear door/hatch options on
vehicles. |
|
|
|